Centerville Foundation Pros logoCenterville Foundation ProsFoundation Repair · Centerville, UT
Menu
foundation crack repair in Centerville, UT

Centerville Foundation Pros

Foundation Crack Repair in Centerville, UT

Foundation crack repair in Centerville, UT with epoxy and polyurethane injection. Structural and waterproofing seals, free estimates.

Serving Centerville and nearby communities.

Not every foundation crack means trouble. The difference between a cosmetic hairline and a structural problem comes down to pattern and width, not age. Foundation crack repair uses epoxy injection to structurally bond a crack back together, or polyurethane injection to seal an actively leaking one, depending on what's causing it.

Centerville basements see both types after a hard winter freeze-thaw cycle, followed by spring snowmelt pushing moisture through the concrete.

What's included

What's Included with Foundation Crack Repair

Typically included: crack inspection, surface cleaning, injection port setup, epoxy or polyurethane injection, and surface finishing.

Optional: exterior surface sealing, monitoring points to track future movement, pairing with a drain tie-in if water is active.

Customer prep: clear access to the cracked wall area, take photos of the crack over time if you've been watching it, note if it appears only seasonally.

How it works

How Our Foundation Crack Repair Process Works

  1. Crack Inspection photo
    Step 1

    Crack Inspection

    Each crack examined to determine type, width, and likely cause.

  2. Surface Cleaning photo
    Step 2

    Surface Cleaning

    Debris and loose material removed from the crack area.

  3. Injection Port Setup photo
    Step 3

    Injection Port Setup

    Ports installed along the crack length for material delivery.

  4. Sealant Injection photo
    Step 4

    Sealant Injection

    Epoxy or polyurethane injected to fill and bond the crack.

  5. Surface Finishing photo
    Step 5

    Surface Finishing

    Excess material removed and surface smoothed flush.

  6. Final Inspection photo
    Step 6

    Final Inspection

    Repair checked to confirm a watertight, stable seal.

Materials

Materials and Methods for Foundation Crack Repair

  • Epoxy Injection Resin photo

    Epoxy Injection Resin

    Bonds structural cracks back together, the right call when the crack isn't actively leaking.

  • Polyurethane Foam Sealant photo

    Polyurethane Foam Sealant

    Expands to block water infiltration, the choice for cracks that leak after snowmelt or heavy rain.

  • Injection Ports photo

    Injection Ports

    Deliver sealant under pressure along the full crack depth, not just the visible surface.

  • Surface Primer photo

    Surface Primer

    Preps the concrete so the patch bonds instead of flaking off later.

  • Masonry Patch Compound photo

    Masonry Patch Compound

    Finishes and blends the repaired surface with the surrounding wall.

  • Protective Topcoat photo

    Protective Topcoat

    Shields the repair from the moisture cycles that caused the crack to begin with.

Timeline

How Long Does a Foundation Crack Repair Take?

  1. 01

    Consult and crack inspection

    same day
  2. 02

    Injection and sealing

    a few hours per crack.

  3. 03

    Surface finishing

    same visit.

  4. 04

    Cure time before full load-bearing

    24 hours

Need a schedule that fits?

Get a Free Estimate

Before & after

Before and after Foundation Crack Repair

  • foundation crack repair in Centerville, UT
    Before
  • foundation crack repair in Centerville, UT
    After

FAQs

Foundation Crack Repair FAQs

How do I know if my crack is cosmetic or structural?

Thin vertical cracks under 1/8 inch, especially near the middle of a wall, are usually shrinkage cracks. Horizontal cracks, stair-step patterns in block walls, or cracks wider at one end point to structural movement and need a closer look.

What's the difference between epoxy and polyurethane injection?

Epoxy structurally bonds the concrete back together and works best on dry, non-leaking cracks. Polyurethane expands and seals against active water, so it's the better fit for a leaking crack.

How much does crack repair cost?

Most single-crack injection jobs run $400-$1,500 depending on crack length and material used.

Do I need a permit for crack injection?

Cosmetic and sealing-level crack injection usually doesn't require a permit since it's a repair, not a structural modification.

Can I seal a crack myself?

Store-bought sealants can work temporarily on hairline surface cracks but don't address active water pressure or structural movement the way injected epoxy or polyurethane does.

Is it urgent if my basement smells musty every spring?

A recurring musty smell often means moisture is getting in through an untreated crack. It's worth having it checked before it affects framing or finished walls.

Next step

Get a Foundation Crack Repair Estimate in Centerville

Call (435) 325-2631 or request a free estimate. Centerville Foundation Pros can tell you in one visit whether it's cosmetic or something to fix now.

Ask about Foundation Crack Repair

Tell us about the project and how to reach you.

Call (435) 325-2631